5 Tips on how to clean carpet mold

When you notice mold in your carpets, you need to take appropriate steps to get that cleaned as soon as possible. That’s because mold in the carpet can create an impact on its quality, give life to unpleasant odours and lead you or your family members to a variety of health conditions.

Many homeowners are aware of the important of carpet cleaning to get rid of mold. Unfortunately, they don’t tend to work accordingly to get mold removed from their carpets. This can lead them towards a lot of hassle and frustration in the long run. Below mentioned are 5 tips, which you will be able to follow to get your carpets cleaned.

carpet mold cleaning

  1. Prepare for the carpet cleaning process

When you want to remove mold from your carpets, you will need to pay special attention towards preparation. Then you will be able to end up with the best possible results within a short period of time. For example, you need to check whether mold has reached the backing, which you can see on the base of your carpet. In such a situation, cleaning your carpet would require a lot of time and effort. Hence, you are not encouraged to get the job done on your own, but you will need to seek the assistance of a professional carpet cleaner.

You can also ventilate the room, where you have carpets with mold. You can go ahead and open all the doors and windows in that room. Then the flow of air that will come into the room would minimize the humidity. As a result, you will be provided with assistance when removing mold. In case if you are planning to use a carpet cleaning product made out of chemicals, you should focus a lot on this fact. That’s because proper ventilation can help you to stay away from the irritations of your lungs and eyes by chemicals.

If there is a possibility, you must go ahead and sun the carpet as well. However, this can only be done if you have a removable carpet at home. You need to keep the carpet with mold under direct sunlight for a period of about 48 hours. This will help you to kill the mold spores. In addition, you will be able to get rid of moisture, which promotes the growth of mold in the long run.

  1. Use baking soda or vinegar

If you are looking for a convenient method to get rid of mold in the carpets at home, you can think about using baking soda or vinegar. Baking soda has got the ability to help you with removing the odours, while absorbing moisture. You just need to sprinkle baking soda over the carpet and keep them overnight. On the following morning, you can vacuum clean and remove baking soda from the carpets.

As mentioned earlier, vinegar can also be used to get an efficient carpet cleaning job done at the comfort of your home. But it is important to be careful to stick to white coloured vinegar, so that you will not be leaving any stains on the carpet. You can lightly apply vinegar on the carpets with the assistance of a spray bottle. Then you can scrub the carpets with the help of a stiff brush. As the next step, you can simply air dry your carpet or blow dry it. You need to do this in a properly ventilated area to get the best possible results. You must be careful not to leave any moisture in the carpets, as it can replenish mold.

  1. Use an anti-mold treatment

It is possible for you to purchase a variety of anti-mold treatments from the market. You will be able to go ahead and purchase such a treatment to get help with removing mold in your carpets. You can easily get them in the form of antifungal sprays or anti-mold sprays in the local supermarkets and drug stores. Before you purchase a product, you need to double check and verify whether it is good enough to be used on the carpets or not. In fact, the products that come along with mold barrier can help you to get better results with removing mold.

Carpet Mold

  1. Rent out a steam cleaner

A steam cleaner can also be used to get rid of mold found in your carpets. You don’t need to purchase a one. You can simply rent out a steam cleaner. You just need to get your hands on a steam clear and use it accordingly as advised. After you do the job, it is extremely important to dry the carpet as soon as possible as well. That’s because the moisture left on your carpet with steam cleaning can promote the growth of mold again. Therefore, you will be able to use a blow dryer or  a blow fan and get the carpet dried within a short period of time. With that, it is possible to end up with efficient results in carpet cleaning.

  1. Get the help of a professional service provider

The professional service providers out there in the world have a lot of experience in helping people to get mold removed in their carpets. Therefore, you can think about contacting one of them and asking for assistance. With the experience, professionals are in a position to figure out the specific type of mold present in your carpets. Then they will be able to use appropriate chemicals or machines to get the job done.

If you have tried steam cleaning methods before, you can get in touch with the professional carpet cleaner and get an ice blasting treatment. With that, you will be able to make sure that your carpets are properly cleaned to remove mold trapped in.

Spread the love